45 amp sine wave E Bike Power UK
45 amp sine wave E Bike Power UK

Fat Wheel E Bike Conversion Kit Rear Wheel 20″ x 4″ 26” x 4” 175mm 7 Speed Sine Wave Colour Display

£399.00

Packing List,

2000W brushless Gearless Hub Motor.
20” or 26” x 4” RIM
7 FREEWHEEL
All Black Lightweight Double Wall Aluminium Rim.
All Black 36 Stainless Spokes.
All Black Magnetic brake sensors.
Sine Wave 45Amp 48V-72V Controller. With 250W
restrictor.
All Black Twist Throttle
Pedal Assist Sensor.
Waterproof Controller Bag.
1 x Steel Torque Arm.
Yellow MT60 Phase & XT60 Battery Connector.
Cable Ties.
Crank removal tool.
Cable wrap.
Rim tape.
All kits come with MT60 Phase connector & XT60
connector for your battery.

SKU: N/A Category:

Hello, Welcome to E Bike Power UK.

Here we offer the best of quality electric conversion kits for your bike.

PLEASE READ THE FULL DESCRIPTION. Thank you!

This is the ultimate fat bike kit!
Universal controller voltage 48V 52V 60V 72V.
250W restrictor
While offering a wide range of power.
These kits are suited to all bikes that have rear dropouts with a minimum width of 175mm to with a 7 Speed freewheel.
Please note rider weight, terrain, whether plays a factor in the performances.

These kits are suited to fat tyre bikes 20” x 4” or 26” x 4”
Please note this is a 4-Inch-wide rim.
175mm rear dropout size
Rear disc brakes from 160mm to 202mm.

Common Questions….

These kits can be used without.
Magnetic brake Levers or sensors, (optional)
Pedal assist sensor, (optional)
You can use throttle only is you wish. We supply all the above in the kit, whether you use all the above or just one or two of the options the kit still performs as it should.

Note,

These kits do take a certain level of DIY experiences to install. There are lots of videos on YouTube to help you out.
Please take your time when installing this kit as this is a DIY kit and all bikes are different. Make sure you do plenty of research the help guide you to a successful build.

Warranty,

3-month warranty on the kit.
12-month warranty on the battery.
Warranty will not cover. Abuse, wear & tare or water damage. Modification to any wiring or cables without our consent. If you remove any of the original connectors or labels without our consent  your warranty will be void. If you use aftermarket parts without our consent
All warranty repairs are covered by us. Buyer pays for the shipping. Returning parts that you may deem as faulty. The return shipping is covered by you, (the buyer)

Legality

The controller can be limited to half speed. The throttle can be turned off via the display. You can limit the bike to help comply with the UK E-Bike laws.
We please ask you to comply with your local government’s E-Bike laws & regulations. Please note these kits are not fit for use on public highways.  E Bike Power UK holds no liability or responsibility for how you intend to use your purchase.
Out of the box this kit is not road legal, off-road use only.

Need a battery??

Please have a look at our other items for sale.
Our Batteries come with an XT60. Just plug & play.

E Bike Power UK Shop.

Please check out our store, we have many accessories for your DIY E Bike Builds.

Tips & Tricks,

Tip. Please ensure both axle nuts are tight.
Tip. Please ensure your take care of your motor cable upon installation. Use good quality cable ties.
Tip. Remove the plastic spacer when installing your disc rota.
Tip. We recommend a 203mm disc rots and adaptor plate on the rear as the hub motor is big and it's possible it may rub on your rear brake calliper.
Tip. Use a slime inner tube. Just makes it better is you get regular punchers.
Trick. Remove your brake calliper before you install your wheel. This makes it easier.
Tip. If your wheel doesn’t spin freely after you have installed it, make sure the 3 phases wires are not touching.
Tip. You will need a crank removal tool to remove your crank if you are fitting the Pedal Assist Sensor.
WE SELL THIS IN OUR STORE.
TIP. Use thread lock on your disc rotor bolts. This will prevent your disc rotor bolts coming loose and damaging the power cable to the motor. For longevity & reliability this kit is best suited to 2000w of power.
TIP. the wheels spokes may relax. You may need to tighten some spokes after a test ride.
TIP. We recommend fitting two torque arms (this kit only comes with two) Please fit them both in different orientations.

MAINTENANCES.

Please do regular checks on your bike.
Axle nuts & torque arms are tight.
Motor cable is clear from the disc rota.
Coat your wheel in GT85. This helps to protect it from
any corrosion.
We recommend that you always take care of your DIY e-bike build for longevities, safety & a reliable bike.

Shipping,

All orders will be fully inspected & tested prior to dispatch. You order will be shipped within 24 hours of cleared payment.
We Use DPD, UPS, Parcelforce & Royal Mail this all depends on your whereabouts within the UK & the size of your order.
All orders are full tracked.
If you need a weekend delivery, please ask as we can do this for you.
HOWEVER, THERE IS AN EXTRA CHARGE

Help,

If you have any doubt, please contact us! We will be sure to help!

Shipping,

All order will be processed as shipped within 24 hours. Please allow 2-3 days for delivery Our aim is to deliver your order as fast as possible.

Returns,

We offer 14-day return policy.
We do hope you are happy with your purchase.
If in an invent you need to return your order.
Please contact us within the 14-day period.
This item MUST be in an unused condition with all components and accessories present.
ALL RETURNS ARE AT THE BUYER COST!

Thank you for your time E Bike Power UK.

Size

20” 175mm 2000W, 26” 175mm 2000W

Reviews

There are no reviews yet.

Be the first to review “Fat Wheel E Bike Conversion Kit Rear Wheel 20″ x 4″ 26” x 4” 175mm 7 Speed Sine Wave Colour Display”

Your email address will not be published. Required fields are marked *