ALL KITS & BATTERIES ARE FULLY TESTED PRIOR TO DISPATCH GUARANTEE

IF YOU ORDER A BATTERY, YOUR BATTERY IT WILL BE SHIPPED SEPARATELY!

These kits can be used without.Magnetic brake sensors, (optional)
Pedal assist sensor, (optional)
Speed limit switch. (optional)
Front headlight, (optional)

You can use throttle only is you wish. We supply
all the above in the kit, whether you use all the
above or not.

Power & Range

1000W Brushless, Gearless Hub Motor with 30H
magnets the increased magnets size increases torque for
hill climbs.
Speed of up to 35 MPH.
15-30 miles depending on how you ride.
Please note rider weight, terrain, whether plays a factor in the performances.

Limit Switch

The limit switch has been designed to.
1. Disable the throttle
2. Assist you to approximately 15.5MPH
Battery voltage and rider weight will vary.
We will send you our 36V 250W stickers for FREE!

Note,

These kits do take a certain level of DIY experiences to install. There are lots of videos on YouTube to help you out.

Please take your time when installing this kit as
this is a DIY kit and all bikes are different.
Make sure you do plenty of research to help guide
you to a successful build.

Warranty,

3-month warranty on the kit.
12-month warranty on the battery.

Warranty will not cover.
Abuse, wear & tare, or water damage.
Modification to any wiring or cables without our
consent.
If you remove any of the original connectors or
labels without our consent
your warranty will be void.
If you use aftermarket parts without our consent

All warranty repairs are covered by us.
Buyer pays for the shipping.

Returning parts that you may deem as faulty.
The return shipping is covered by you, (the buyer)

E Bike Power UK Shop.

Please check out our store, we have many
accessories for your DIY E Bike Builds.

Tips & Tricks,

Tip. Please double check the battery will fit your
bike.
Tip. Please ensure both axle nuts are tight.
Tip. Please ensure your take care of your motor
cable upon installation.
Use good quality cable ties.
Tip. Remove the plastic spacer when installing
your disc rota.
Tip. We recommend a 203mm disc rots and
adaptor plate on the rear as the hub motor is big
and it's possible it may rub on your rear brake
calliper.
Tip.
Tip. Use a slime inner tube. Just makes it better is
you get regular punchers.
Trick. Remove your brake calliper before you
install your wheel. This makes it easier.
Tip. If your wheel doesn’t spin freely after you
have installed it, make sure the 3 phases wires are
not touching.
Tip. You will need a crank removal tool to remove
your crank if you are fitting the Pedal Assist
Sensor.
WE SELL THIS IN OUR STORE.

TIP. Use thread lock on your disc rotor bolts. This
will prevent your disc rotor bolts coming loose and
damaging the power cable to the motor.
For longevity & reliability this kit is best suited to
1000W of power.
TIP. the wheels spokes may relax. You may need
to tighten some spokes after a test ride.
TIP. We recommend fitting two torque arms (this
kit only comes with two) Please fit them both in
different orientations.

MAINTENANCES.

Please do regular checks on your bike.
Axle nuts & torque arms are tight.
Motor cable is clear from the disc rota.
Coat your wheel in GT85. This helps to protect it from any corrosion.
We recommend that you always take care of your DIY e-bike build for longevities, safety & a reliable bike.

Shipping,

Your battery is shipped separably to your kit.
You will receive two boxes.
All orders will be fully inspected & tested prior to
dispatch. You order will be shipped within 24 hours
of cleared payment.

We Use DPD, UPS, Parcelforce & Royal Mail this
all depends on your whereabouts within the UK &
the size of your order.
We will always do our best to get your order
dispatched & delivered to you as fast as possible.

All orders are full tracked.

If you need a weekend delivery, please ask as we
can do this for you.
HOWEVER, THERE IS AN EXTRA CHARGE

Help,

If you have any doubt, please contact us!
We will be sure to help!

Returns,

✔️ We offer 14-day return policy.
✔️ We do hope you are happy with your purchase.
✔️ If in an invent you need to return your order.
✔️ Please contact us within the 14-day period.
✔️ This item MUST be in an unused condition with
all components and accessories present.

✔️ ALL RETURNS ARE AT THE BUYER COST!
By making a purchase we have reserved the right
of your consent you have read & fully
understand the full description, If in doubt,
please contact us before making your
purchase.

Thank you for your time E Bike Power UK.